https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with push-in connection and plug-in
miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 PDTs, input voltage 24 V AC/DC
The figure shows a version with a
screw connection
Product Features
Slim design
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
RT III sealed relay
Functional plug-in bridges
Integrated input circuit and interference suppression circuit
Key commercial data
Packing unit
1 pc
Weight per Piece (excluding packing)
58.7 GRM
Custom tariff number
85364900
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
14 mm
Height
80 mm
Depth
94 mm
10/10/2014 Page 1 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Coil side
Nominal input voltage UN
24 V AC/DC
Typical input current at UN
17.5 mA
Typical response time
8 ms
Typical release time
10 ms
Operating voltage display
Yellow LED
Protective circuit
Bridge rectifier Bridge rectifier
Contact side
Contact type
2 PDT
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in
adjacent modules. Potential bridging is then carried out with FBST 8-PLC...
or ...FBST 500...)
Minimum switching voltage
5 V AC/DC (at 10 mA)
Maximum inrush current
15 A (300 ms)
Min. switching current
10 mA (At 5 V)
Limiting continuous current
6A
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
2 A (at 24 V, DC13)
0.2 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)
General
Operating mode
100% operating factor
Degree of protection
RT III (Relay)
Mechanical service life
3 x 10 cycles
Inflammability class according to UL 94
V0
Designation
Standards/regulations
7
10/10/2014 Page 2 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Technical data
General
Standards/regulations
IEC 60664
EN 50178
IEC 62103
Rated surge voltage / insulation
6 kV (safe isolation: control side / contact side)
Pollution degree
2
Surge voltage category
III
Mounting position
any
Assembly instructions
In rows with zero spacing
Connection data
Connection method
Push-in connection
Stripping length
8 mm
Conductor cross section stranded min.
0.14 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section solid min.
0.14 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG/kcmil max
14
Conductor cross section AWG/kcmil min.
26
Articles in set
Relay socket - PLC-BPT- 24UC/21-21 - 2900284
14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS
35/7,5, 2 PDTs, input voltage 24 V AC/DC
Single relay - REL-MR- 24DC/21-21 - 2961192
Plug-in miniature power relay, with power contact, 2 PDTs, input voltage 24 V DC
10/10/2014 Page 3 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Classifications
eCl@ss
eCl@ss 4.0
27371001
eCl@ss 4.1
27371001
eCl@ss 5.0
27371001
eCl@ss 5.1
27371001
eCl@ss 6.0
27371001
eCl@ss 7.0
27371001
eCl@ss 8.0
27371001
ETIM
ETIM 4.0
EC000196
ETIM 5.0
EC000196
UNSPSC
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 13.2
39121515
Approvals
Approvals
Approvals
GL / UL Listed / cUL Listed / UL Recognized / cUL Recognized / cUL Listed / cULus Recognized / cULus Listed / cULus Listed / cULus Listed / null /
null / null / null
Ex Approvals
Approvals submitted
Approval details
GL
10/10/2014 Page 4 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Approvals
UL Listed
cUL Listed
UL Recognized
cUL Recognized
cUL Listed
cULus Recognized
cULus Listed
cULus Listed
cULus Listed
10/10/2014 Page 5 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Approvals
Accessories
Accessories
Bridge
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, Length: 500 mm, Color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, Length: 500 mm, Color: blue
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, Length: 500 mm, Color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red
10/10/2014 Page 6 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Accessories
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red
Labeled terminal marker
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field:
10.15 x 10.5 mm
10/10/2014 Page 7 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Accessories
Mounting rail
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
10/10/2014 Page 8 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
Partition plate
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
10/10/2014 Page 9 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Accessories
Power module
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip
Terminal marking
Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Drawings
10/10/2014 Page 10 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Diagram
Circuit diagram
Switching current [A]
20
21
10
6
4
24
1
2
4
1
3
2
0,5
0,3
0,2
A2
11
A1
14
22
12
0,1
10
20
30
50 70 100
200
Switching voltage [V]
300
1 AC, ohmic load
2 DC, ohmic load, contacts in series
3 DC, ohmic load
4 DC, L/R = 40 ms
Interrupting rating
Diagram
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)
10/10/2014 Page 11 / 12
https://www.phoenixcontact.com/us/products/2900332
Relay Module - PLC-RPT- 24UC/21-21 - 2900332
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com
10/10/2014 Page 12 / 12
